Cleaning the Paper Feed Rollers

Clean the paper feed rollers if paper jams occur frequently.

Note: You should replace the paper feed rollers if paper jams keep occuring after cleaning them.

For Tray 1

  1. Pull out tray 1.

  2. Wipe the two paper feed rollers (2) inside the printer with a damp cloth that has been wrung out well.

  3. Remove the paper loaded in the tray.
  4. Wipe the paper feed roller (3) on the tray with the cloth.

  5. Load paper in the tray.
  6. Push the tray back into the printer. 

For MP Tray

  1. Open the MP tray (1) forward by inserting  your fingers into the front recesses.

  2. Release the tab (3) of the paper feed roller cover by pressing the right arm (4) inward while lifting up the MP tray (1) lightly.

  3. Also press the left arm (4) inward while lifting up the MP tray (1) lightly to release the tab (3) of the paper feed roller cover.

  4. Open the paper set cover (5) until touching the printer.

  5. Wipe the two paper feed rollers (6) with a damp cloth that has been wrung out well.
  6. Open the separation roller cover (7) forward while pressing the center part of the MP tray. Wipe the two separation roller (8) with a wet cloth that has been wrung out well.

  7. Close the separation roller cover (7).
  8. Lower the paper set cover (5).
  9. Hook one tab (3) of the paper feed roller cover by pressing the right arm (4) inward while lifting up the MP tray (1) lightly.

    Note: If closing the MP tray without returning the tab to the correct position, the paper set cover may be broken. Be sure to return the tab to the original position.

  10. Also hook the other tab (3) of the paper feed roller cover by pressing the left arm (4) inward while lifting up the MP tray (1) lightly.

  11. Close the MP Tray. If the MP tray cannot be closed, return the paper set cover to the correct position by pressing the paper loading part on the MP tray downward.

 

en_USEnglish