“Fuser Unit Near Life.” is displayed.

Lifespan of the fuser unit has been reached. Press the [HELP] button, and solve according to the guidance shown on the Help screen. This happens at about 10,000 pages.

  1. Prepare a new fuser unit.

  2. Lift opener (1) of the exit unit and pull out the exit unit.

  3. Pull up the fuser’s lock lever (blue).

  4. Hold the fuser unit’s handle with both hands and remove it.
  5. Remove the new fuser unit from its packaging.

  6. Hold the new fuser unit’s handle with both hands and set it into the exit unit.

  7. Push down the fuser unit’s lock lever (blue).

  8. Put the exit unit back into the printer.

Please support recycling of the used fuser units. When disposing of the used fuser unit in unavoidable circumstances, put it in a plastic bag and dispose according to the instructions provided by your local municipality

en_USEnglish